InstagramWhatsApp
UBXServices
What we do

Design to delivery,
under one roof.

Architecture, interiors and the furniture inside them, drawn in our studio and made in our workshop. Choose a service to see what it includes.

01Architecture02Interior design03Furniture production04Turnkey projects05Technical drawings06Wall panels07Outdoor08Renovation
Studio & workshopİskele, North Cyprus
Disciplines08
Stages04
LanguagesEnglish · Türkçe · Русский
Our workshop

Made by hand
in İskele.

Two production lines under one roof: an upholstery shop for sofas, beds and seating, and a joinery shop for kitchens, wardrobes and built-in furniture. Every piece is made to the drawing, for one room.

The UBX workshop: sheet store, panel saw, edge bander and upholstery bench Sheet store Panel saw Edge banding Upholstery
A sofa assembled layer by layer: frame, webbing, foam and cushions
Line 01

Soft furniture

Sofas, armchairs, beds, headboards and booth seating, built from the frame up.

See the process
A cabinet assembled from its parts: carcass, shelves, doors and drawers
Line 02

Carpentry

Kitchens, wardrobes, TV walls and joinery in 18 mm AGT MDF, made to the millimetre.

See the process
Workshop · Line 01

Soft furniture

Sofas, armchairs, beds and headboards, built from the frame up.

Every piece starts as a drawing sized to your room, not a catalogue model. You choose the shape, the comfort and the fabric. We build it by hand, layer by layer, in eight steps.

We make
Sofas & corner sofasArmchairsBeds & headboardsBanquettes & boothsUpholstered wall panelsCushions
A dimensioned sofa drawing with fabric samplesA timber sofa frame being assembledElastic webbing and springs across a sofa seat frameFoam cut in layers of different density with a fibre wrapFabric roll, cut pattern pieces and a sewing machineA sofa half covered in fabric, with a staple gunA finished cream sofa with pillows, checked and readyThe UBX delivery van with a wrapped piece of furniture01 / 08Design & sizing
  1. A dimensioned sofa drawing with fabric samples01/ 08

    Design & sizing

    We draw the piece to your room: overall size, seat height and depth, arm shape and cushion style. You approve a drawing with every dimension before anything is cut.

    • Dimensioned drawing
    • Comfort level agreed
    • Fabric samples to choose from
  2. A timber sofa frame being assembled02/ 08

    Frame

    The frame is cut from solid timber and plywood, then glued and screwed together so it stays rigid for years of daily use.

    • Solid timber and plywood
    • Glued and screwed joints
    • Corner blocks where loads meet
  3. Elastic webbing and springs across a sofa seat frame03/ 08

    Suspension

    Springs or elastic webbing are stretched across the seat and back. This layer decides how the seat feels after years, not just on the first day.

    • Zig-zag springs or webbing
    • Tension set by hand
    • Matched to the seat depth
  4. Foam cut in layers of different density with a fibre wrap04/ 08

    Foam & padding

    Foam is cut in layers of different density, firm at the base and softer on top, then wrapped in fibre so cushions keep their shape.

    • Layered densities
    • Fibre wrap for a soft top
    • Cut to the drawing
  5. Fabric roll, cut pattern pieces and a sewing machine05/ 08

    Cutting & sewing

    The fabric is cut from patterns, with stripes and textures matched across seams, then sewn with piping and zips where the design calls for them.

    • Patterns cut per piece
    • Matched seams
    • Piping and zips
  6. A sofa half covered in fabric, with a staple gun06/ 08

    Upholstery

    The cover is pulled over the padding and fixed by hand, corner by corner, until every line is straight and every panel is tight.

    • Fitted by hand
    • Even tension on every panel
    • Clean corners and edges
  7. A finished cream sofa with pillows, checked and ready07/ 08

    Finishing & check

    Legs, cushions and pillows go on. We check stitching, symmetry and comfort, then wrap the piece for the road.

    • Legs and glides fitted
    • Stitching and symmetry checked
    • Wrapped for transport
  8. The UBX delivery van with a wrapped piece of furniture08/ 08

    Delivery

    Our own team delivers it in our van, carries it in and places it where it belongs.

    • Our own van and team
    • Carried in and placed
    • Packaging taken away
Ask about soft furniture Browse materials
Workshop · Line 02

Carpentry

Kitchens, wardrobes, TV walls and built-in furniture, made to the millimetre.

One board standard, one hardware standard and a cutting list for every part. From the first measurement to the last adjusted door, this is how a kitchen or wardrobe is made.

We make
Kitchens & islandsWardrobes & walk-insTV walls & shelvingBathroom vanitiesDecor panelsHotel & office joinery
A wall measured for a kitchen run, with a tape measureParts nested on an MDF sheet next to the cutting listAn MDF sheet cut to size on the sawAn edge band being pressed onto an MDF panel edgeHinge holes, shelf pin rows and a back groove drilled into a panelA cabinet assembled with soft-close hinges and a drawerFinished units wrapped in film and labelledA finished kitchen installed and levelled on site01 / 08Measure & design
  1. A wall measured for a kitchen run, with a tape measure01/ 08

    Measure & design

    We measure every wall, pipe and socket on site, then design the run in 3D with each door, drawer and appliance in place.

    • Site measurement
    • 3D design and renders
    • Appliances planned in
  2. Parts nested on an MDF sheet next to the cutting list02/ 08

    Cutting list

    Our Constructor turns the design into parts: the size, board, edging and hardware of every panel, nested on full sheets to keep waste low.

    • Every part listed
    • Nested on 2800 × 2100 sheets
    • Edging and hardware per part
  3. An MDF sheet cut to size on the saw03/ 08

    Panel cutting

    Sheets of 18 mm AGT MDF are cut to the list, part by part, with the saw kerf allowed for so every size comes out exact.

    • 18 mm AGT MDF
    • Cut to the millimetre
    • Parts labelled as they come off
  4. An edge band being pressed onto an MDF panel edge04/ 08

    Edge banding

    Visible edges are banded in PVC or ABS, from 0.8 to 2 mm depending on how the part is used, then trimmed and cleaned.

    • PVC or ABS banding
    • 0.8, 1 or 2 mm
    • Trimmed and cleaned
  5. Hinge holes, shelf pin rows and a back groove drilled into a panel05/ 08

    Drilling & grooving

    Holes for hinges, shelf pins and connectors are drilled, and a groove is cut for the back panel so the carcass stays square.

    • Hinge cups and shelf pins
    • Grooved-in back panels
    • 8 mm MDF or 3 mm HDF backs
  6. A cabinet assembled with soft-close hinges and a drawer06/ 08

    Assembly & hardware

    Carcasses are assembled square and fitted with soft-close hinges, full-extension runners, drawer systems and handle profiles.

    • SAMET soft-close, Blum on request
    • FlowBox or AlphaBox drawers
    • Push-to-open or handleless
  7. Finished units wrapped in film and labelled07/ 08

    Check & wrap

    Doors are aligned and every drawer tested. Each unit is labelled for its place in the room and wrapped for transport.

    • Doors aligned
    • Drawers tested
    • Labelled by position
  8. A finished kitchen installed and levelled on site08/ 08

    Installation

    Our team installs, levels and fixes the units, fits the worktop and adjusts every door on site before handover.

    • Levelled and fixed
    • Worktops fitted
    • Final adjustment on site
Ask about carpentry Try the Constructor
Design studio

Architecture, interiors
& drawings

One studio for the building, the rooms and the drawings.

Whether it is a villa, a café or a single kitchen, design follows the same five steps: from a scan of the real space to drawings a workshop can build from.

Tools
AutoCADSketchUp3ds MaxCoronaV-RayPhotoshop
Architecture by UBX
01

Architecture

Villas, container homes and commercial buildings, from the first sketch to planning approval.

  • Concept and massing
  • Floor plans and elevations
  • 3D exteriors
  • Permit set
Interior design by UBX
02

Interior design

Complete schemes for homes, hotels, cafés and offices, visualised before anything is ordered.

  • Space planning
  • Lighting and ceilings
  • Materials and finishes
  • Photoreal renders
Technical drawings by UBX
03

Technical drawings

Production drawings and cutting lists that any workshop can build from.

  • Joinery details
  • Cutting lists
  • Hardware schedules
  • Drawing sets for contractors
A room scanned from a tripod, with measured points along the wallsA room modelled in 3D with walls and furnitureA photoreal render of a living roomA floor plan with dimensions, a section and a title blockAn approved drawing set with a stamp01 / 05Survey & scan
  1. A room scanned from a tripod, with measured points along the walls01/ 05

    Survey & scan

    We measure every wall, opening and level on site and scan the space, so the model starts from the real room rather than an old plan.

    • Measured survey
    • 3D scan of the space
    • Photos of every wall
  2. A room modelled in 3D with walls and furniture02/ 05

    3D modelling

    The building or room is modelled in 3D: walls, openings, joinery, furniture and lighting, all to real dimensions.

    • SketchUp and 3ds Max
    • Real dimensions
    • Joinery modelled in detail
  3. A photoreal render of a living room03/ 05

    Renders

    Each room is rendered in real light with real materials, so you approve exactly what will be built and change it before it costs anything.

    • Corona and V-Ray
    • Real materials from our library
    • Revisions included
  4. A floor plan with dimensions, a section and a title block04/ 05

    Technical drawings

    Plans, sections, elevations and joinery details, dimensioned and annotated with materials, ready for a workshop or a contractor.

    • AutoCAD drawing sets
    • Joinery and cutting details
    • Material schedules
  5. An approved drawing set with a stamp05/ 05

    Approval & handover

    For buildings, we prepare the planning set. For interiors, the drawings go straight to our workshop or to your contractor.

    • Planning and permit set
    • Production drawings
    • Support during the build
Ask about design See our work
Build & finish

From empty shell
to finished space.

When the job is bigger than one room or one piece of furniture, we take on the whole thing, with the same studio and the same workshop behind it.

A finished room ready to hand over, with keys

Turnkey projects

One contract for design, supply, appliances and installation.

  1. 01

    One design

    Every room drawn, rendered and approved first.

  2. 02

    One schedule

    We make what we can, order the rest and coordinate every trade.

  3. 03

    One handover

    You get the keys to a finished space.

Ask about turnkey
A lobby wall of oak slatted panels with lighting

Wall panels

Decorative wall surfaces for hotels, lobbies and homes.

  1. 01

    Choose

    Wood, stone, metallic or plain, tried on a wall in our Visualizer.

  2. 02

    Cut to size

    Each panel made for its wall, with slatted and backlit options.

  3. 03

    Install

    Fitted by our team, in new builds or hotel refits.

Try the Visualizer
A terrace with a timber pergola, planters and a pool

Outdoor

Terraces, gardens and outdoor kitchens for the Mediterranean sun.

  1. 01

    Plan

    Shade, planting and views worked out with the house.

  2. 02

    Build

    Terraces, pergolas, outdoor kitchens and pool surrounds.

  3. 03

    Light

    Lighting and finishes that stand up to sun, salt and rain.

Ask about outdoor work
A room half before and half after renovation

Renovation

Apartments and villas refitted room by room.

  1. 01

    Survey

    We look at what is there and keep what works.

  2. 02

    Rebuild

    New layouts, kitchens, bathrooms, ceilings and lighting.

  3. 03

    Refit

    Built-in furniture and decor, ready to live in or let.

See a renovation
How we work

From first sketch
to final hinge.

Four stages, one point of contact and a schedule agreed before work begins. You see and approve each stage before the next one starts.

Floor plan drawn in the UBX Home Planner
01

Brief & survey

We visit the site, measure every wall and listen to how you live or work.

You receiveA measured plan, a written brief and a first budget range.
Rendered dining room of the Ikhtiyar residence
02

Concept & visuals

Layouts, materials and renders you approve before a single sheet is cut.

You receiveRenders of every room, a material board and a fixed quote.
Cabinet parts lifting off an MDF sheet, from the UBX film
03

Production

Cut, edge-banded and assembled in our workshop, checked panel by panel.

You receiveProduction drawings and an agreed delivery date.
Finished living room with green wall panels, from the UBX film
04

Delivery

Our own team delivers and installs on the agreed date, then walks you through it.

You receiveInstallation, a final check and handover.
Standards

Built to one
specification.

The same board, edging and hardware go into every piece we make, whatever the project.

See all materials
BoardAGT MDF, 18 mmSoft Touch, Supramat, gloss and wood-grain decors
EdgesPVC or ABS banding0.8, 1 or 2 mm, matched to the part
HardwareSAMET soft-closeHinges and full-extension runners, Blum on request
DrawersFlowBox · AlphaBoxPush-to-open and aluminium handleless profiles
WorktopsLDSP or stoneLDSP made in-house, quartz and natural stone from İzmer
Let's create together

Have a space
in mind?

Tell us about it. We reply on WhatsApp, usually the same day.

Start a project WhatsApp
NextContact Tell us about your space.